1+1 hot-standby dual NM ports, auto/manual failover
Hot-swap, hardware & software watchdog
In-service local/remote firmware upgrade
Multi-platform NM: SNMP, CLI, Web, NMS GUI
2×SFP + 2×RJ45 + TYPE-C management ports
Auto-discovery & multi-level topology visualization
TMN-compliant: config, alarm, perf, SW/FW, device-to-network mgmt
4×100G → 1×400G coherent, tunable 75 GHz×64 / 100 GHz×48 @400G, 50 GHz×96 @200G
DP-16/8-QAM, DP-QPSK; o/CFEC, SC/SD-FEC
100GE, 100GE-KR4, OTU4, 100G-FlexE; SR4/CWDM4/LR4/PSM4
RMON, LLDP, constellation, DM, PRBS, OTN-PM/SM; live temp/voltage/current/power
SNMP, CLI, Web, NMS
48×10/100/1000M RJ45 PoE+ 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
16*10/100/1000Base-T RJ45 PoE,8*1G Combo RJ45/SFP, 4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Rack-mount hardware design
Operation temperature: -40 ℃ ~+75℃
DC12~58V (PoE DC 44~57V) input, redundant power supply with polarity reverse/over-voltage protection
PoE is Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standards
Powerful Dip switch function for easy LFP and parameter setting
Supports 10K Bytes Jumbo frame and 1M large buffer
4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
Wide operating temperature: -40℃ ~ +75℃
Compatible 40G QSFP+ to 4 Duplex LC Active Optical Breakout Cable 5m (16ft) 10m (33ft) 15m (49ft) 20m (66ft) 30m (98ft)
Max. Power Consumption 1.4W
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Supports 40G to 4 duplex LC Ethernet
Offers a Cost-effective Way for Short Links
Hot Pluggable QSFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible QSFP+ 4 x 10GBASE-LR 1310nm 10km DOM MPO-12/APC SMF Optical Transceiver Module, Support 4 x 10G-LR
Max. Power Consumption 2.5W
Tested in Targeted Switches
Support 40G to 4x 10G
Compliant to SFF-8436 and QSFP+ MSA
Hot Pluggable QSFP+ Form Factor
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring Capability
• Easy-to-pair(one-key to pair)
• Digital LED Display
• Working temperature:-30～65℃
• IP65 protection
• Optimized Video Transmission Protocol
• Simple Installation and Maintenance(POE 24V)
• Web/Telnett management
• MAC address control
• WEP encryption 64/128bits,WPA,WPA2,802.1x
1U/2U/4U chassis accepts hot-swappable CWDM, DWDM, EDFA, OLPS and OTAP blades
Universal service adaptation: SDH/SONET, Ethernet, SAN, OTN, Video
Line-side modulation up to 100 G, 200 G, 400 G per λ
Configurable topologies: P2P, P2MP, ring; single- or dual-fiber bidirectional
Vendor-agnostic client optics (850 nm / 1310 nm MMF, 1310 nm / 1550 nm SMF, RJ-45 copper) with in-line OADM and wavelength conversion
Unified SNMP/CLI/Web/NetView management, dual hot-swappable AC/DC PSU (1+1)
24×10/100/1000M RJ45 PoE+ 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
24*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
All-in-one high-integration outdoor box-type device, zero-site installation;
Supports IEEE 802.11a/n/ac protocols, 4.9GHz~6.1GHz frequency bands, and ≥250Mbit/s business throughput.
Remote Station built-in 11⁰ High-gain direcctional antennas 23dBi,1x10/100/1000M RJ45( AC220V or PoE supply)
Advanced Y-shaped reinforced safety bracket that resists strong typhoons.
LED signal indicator lights for easy installation and adjustment without a computer, saving project time.
Management methods include MAC, IP, WEB, Telnet, SNMP; supports firmware updates.
IP68 sealing protection with load current protection and static protection.
Advanced technologies: OFDM, MIMO, BeamForming, seamless roaming, load balancing, Mesh networking, STBC, LDPC.
Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable 0.5m (2ft) 1m (3ft) 2m (7ft) 3m (10ft) 4m (13ft) 5m (16ft) 7m (23ft)
Max. Power Consumption 0.5W
Tested in Targeted Switches
Minimum Bend Radius 21mm for Flexible Routing
Supports 40G to 4x 10G Ethernet I
Simplifies the Patching
Hot pluggable QSFP+ and SFP+ MSA Compliant
Low Insertion Loss and Ultra-low Crosstalk
RoHS Compliant
Compatible QSFP28 100GBASE-CWDM4 1310nm 2km DOM Duplex LC/UPC SMF Optical Transceiver Module
Tested in Targeted Switches
High-Speed Electrical Interface Compliant to IEEE 802.3bm
Adopt BOX Packaging with Reliability & Airtightness
Applied to High Bandwidth and Long-distance Connectivity
Hot Pluggable QSFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring for Strong Diagnostics
Industrial 3in1 RS232/RS485/RS422 Serial to Ethernet 10/100M Media Converter (SC/ST/LC)
Supports 1 RS-232/485/422 serial port for remote control functionality.
Supports 1 10/100Base-T(x) Ethernet interface.
Supports Reset button for factory default restoration.
RS232 serial port provides 5 signals including RXD, TXD, RTS, CTS, GND.
RS485/RS422 serial port provides T/R+, T/R-, R+, R-.
Supports MCP, VCOM virtual serial ports.
Supports ±6KV ESD protection for serial ports, and 1.5KVAC isolation protection for Ethernet port.
Supports heartbeat and registration packet functions.
Supports web firmware upgrades.
16×100 GbE client, 8×200 G or 4×400 G line per 1 U shelf
1.6 Tb/s unidirectional, 3.2 Tb/s bidirectional capacity
Multi-box stacking: 19.2 Tb/s (96×200 G @ 50 GHz) or 25.6 Tb/s (64×400 G @ 75 GHz / 48×400 G @ 100 GHz)
Hot-swappable line cards enable pay-as-you-grow expansion and in-service upgrades
Resilient Power
1+1 redundant, field-replaceable PSUs; AC or –48 V DC operation
Dual NM controllers (1+1), unified WEB/SNMP/CLI/TL1 northbound interfaces
16×10/100/1000M RJ45 PoE+,8x1G Combo RJ45/SFP + 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
16*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
All-in-one high-integration outdoor box-type device, zero-site installation;
Supports IEEE 802.11a/n/ac protocols, 4.9GHz~6.1GHz frequency bands, and ≥750Mbit/s business throughput.
Central Station with 90⁰ High-gain sector antennas 18dBi by quality transmission line,1xGE SFP + 1x10/100/1000M RJ45( AC220V or PoE supply)
Advanced Y-shaped reinforced safety bracket that resists strong typhoons and outperforms U-shaped, L-shaped brackets.
LED signal indicator lights for easy installation and adjustment without a computer, saving project time.
High-capacity central point coverage optimization software system with remote site connection capability of ≥32.
Management methods include MAC, IP, WEB, Telnet, SNMP; supports firmware updates.
IP68 sealing protection with load current protection and static protection.
Advanced technologies: OFDM, MIMO, BeamForming, seamless roaming, load balancing, Mesh networking, STBC, LDPC.
Compatible 100G QSFP28 Active Optical Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft) 10m (33ft) 15m (49ft) 20m (66ft) 25m (82ft) 30m (98ft)...
Max. Power Consumption <2.2W
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Simplifies the Patching and Offers a Cost-effective Way for Short Links
Hot Pluggable QSFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible QSFP28 100GBASE-ZR4 1310nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Tested in Targeted Switches for Superior Performance
High-Speed Electrical Interface Compliant to IEEE 802.3bm
Adopt BOX Packaging with Reliability & Airtightness
Applied to High Bandwidth and Long-distance Connectivity
Hot Pluggable QSFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring for Strong Diagnostics
10GBase-X to 10Base-X Guide Rial 10Gigabit Ethernet Media Converter
10G Fiber to Fiber Converter
Support Jumbo Frame
Support hot plugging
Transparent Transport and very low delay
3R function（Regenration , Reshaping , Retiming ）
Ultra-low NF ≤5 dB
C-band flatness ≤1 dB
Hot-swap 110/220 V & –48 V 1+1
LCD, RJ45 & RS-232
Win/Linux GUI supplied
Single/multi-mode line protection
Dual-/single-fiber, 1+1 & 1:1, <20 ms
-50 to +25 dBm range
Local/remote, SNMP/CLI/Web/NetView
Single/multi-mode line protection
Dual-/single-fiber, 1+1 & 1:1, <20 ms
-50 to +25 dBm range
Local/remote, SNMP/CLI/Web/NetView
O-band optical amp, 100G
+10 dBm sat. / –20 dBm min.
SNMP/CLI/Web/NetView mgmt.
Pump & power monitor
Adjustable pump & I/O power
C-band DWDM amp, OSC pass
+23 dBm out, –35 dBm in
Booster, 2-stage line, pre-amp
MON port; pump current/power/temp, in/out power, module temp
Pump on/off, AGC/APC, power set
SNMP CLI Web NetView
C-band DWDM amp, OSC pass
+23 dBm out, –35 dBm in
Booster, 2-stage line, pre-amp
MON port; pump current/power/temp, in/out power, module temp
Pump on/off, AGC/APC, power set
SNMP CLI Web NetView
C-band DWDM amp, OSC pass
+23 dBm out, –35 dBm in
Booster, 2-stage line, pre-amp
MON port; pump current/power/temp, in/out power, module temp
Pump on/off, AGC/APC, power set
SNMP CLI Web NetView
SM/MM conv. & amp; relay, uni-/bi-dir
2×100G bidir / 4×100G unidir
100G-SR4/CWDM4/LR4/PSM4/OTU4, transparent
Hot-swap, FEC, DDM, LOS-tx-shut
SNMP CLI Web NetView
DWDM wavelength conversion
1×40 G bidir, transparent
Hot-swap, FEC, DDM, LOS-tx-mute
SNMP CLI Web NetView
DWDM & wavelength conversion
1×bidir 103.125–111.81 G
100G-SR4/CWDM4/LR4/PSM4
Hot-swap, transparent, auto-TX-shutoff
FEC, CDR, DDM, LOS-tx-mute
SNMP CLI Web NetView
SM↔MM, power amp; uni-/bi-dir relay
850 nm, 1310 nm, CWDM/DWDM
4×bidir / 8×unidir 1.25–25.78 G transparent
Hot-swap, FEC, CDR, DDM, LOS shut-down
SNMP CLI Web NetView
CWDM/DWDM & wavelength conversion
120 km@1.25 G, 100 km@10 G un-amplified
4×bidir / 8×unidir 1.25–11.3 G, SM/MM
SNMP CLI Web NetView
CDR, DDM, laser shutdown, soft-disable
Hot-swap, hitless local/remote firmware upgrade
SNMP unified NM: CLI, Web, NetView GUI
In/out-band cascade; 3×SFP, 2×RJ45, 1×Console
Auto topology discovery & visualization
TMN-compliant: config, alarm, perf, SW/FW, device→network mgmt
2×100G ↔ 2×200G coherent, dual-line; 75 GHz×64 or 100 GHz×48 per 200G
DP-16/8-QAM, DP-QPSK; o/CFEC, SC/SD-FEC
100GE, 100GE-KR4, OTU4, 100G-FlexE; SR4/CWDM4/LR4/PSM4
RMON, DM, PRBS, OTN-PM/SM; live temp/voltage/current/power
SNMP, CLI, Web, NMS, Netconf-Yang
16×10/100/1000M RJ45,8x1G Combo RJ45/SFP + 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
16×1G SFP,8x1G Combo RJ45/SFP + 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
48×1G SFP+ 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
48×10/100/1000M RJ45+ 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
24×10/100/1000M RJ45 + 4×10G SFP+, 1xRJ45 Console port
AC 100-240V, 0~50°C operating temperature
Static/RIP/OSPF/BGP4, ECMP, VRRP L3 routing
GE/2.5GE/10GE LACP aggregation, mirroring
MAC/IP VLAN, QinQ, STP/RSTP/MSTP/ERPS (<20ms recovery)
IGMP snooping, SP/WRR QoS, rate limiting
802.1x, IP/MAC binding, ARP protection
Web/CLI/SNMPv3, HTTPS, DDM, config backup
16×10/100/1000Base-T RJ45 + 8x1G Combo RJ45/SFP 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
16×10/100/1000Base-T RJ45 PoE + 8x1G Combo RJ45/SFP 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
24×10/100/1000Base-T RJ45 PoE + 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
48×10/100/1000Base-T RJ45PoE+ 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IEEE802.3af/at PoE+ (30W/port) with PD WatchDog function
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
48×10/100/1000Base-T RJ45 + 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
24×10/100/1000Base-T RJ45 + 4×1G/2.5G SFP, 1×RJ45 console
AC 100-240V power, 0~50°C operating temperature range
IPv4/IPv6 static routing, G.8032 ERPS ring protocol (<20ms recovery)
MAC/IP/Protocol-based VLAN, port/VLAN/flow-based QinQ
GE/2.5GE LACP aggregation, many-to-one port mirroring
SP/WRR QoS scheduling, ACL, 802.1x, IP/Port/MAC binding
Web/CLI/SNMPv3 management, HTTPS, DDM optical monitoring
Config backup/restore (Web/FTP/TFTP), dual-image firmware support
1×10/100/1000M RJ45+ 1×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
4×10/100/1000M RJ45+ 1×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
8×10/100/1000M RJ45+ 1×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
4×10/100/1000M RJ45 PoE + 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
Dip Switch fast to setting Ring,Vlan,PoE etc
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
4×10/100/1000M RJ45 PoE + 2×SFP flexible ports
9-48VDC(PoE:44~57V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
Dip Switch fast to setting Ring,Vlan etc
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
8×10/100/1000M RJ45 PoE + 2×SFP flexible ports
9-48VDC(PoE:44~57V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
Dip Switch fast to setting Ring,Vlan etc
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
8×10/100/1000M RJ45 PoE + 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
Dip Switch fast to setting Ring,Vlan,PoE etc
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
8×10/100/1000M RJ45 PoE + 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
Dip Switch fast to setting Ring,Vlan,PoE etc
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
16*1000Base-x SFP,8x1G Combo RJ45/SFP,4*1G/2.5G/10GBase-X SFP
Redundant power 36-75V(PoE 44~57V) input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45,8x1G Combo RJ45/SFP,4*1G/2.5G/10GBase-X SFP
Redundant power 36-75V(PoE 44~57V) input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE,4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and 19" Rack-mounting design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE,4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and 19" Rack-mounting design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45, 4*1G/2.5G/10GBase-X SFP
Redundant power 12-75V(PoE 44~57V) input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G/10GBase-X SFP
Redundant power 12-75V(PoE 44~57V) input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45,4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Rack-mount hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45,8*1G Combo RJ45/SFP, 4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Rack-mount hardware design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant 12-58VDC input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant 12-58VDC input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
Redundant 12-58VDC input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
8*10/100/1000Base-T RJ45 PoE, 4*1G SFP & 4*1G/2.5GBase-X SFP
Redundant 12-58VDC input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
8*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant 12-58VDC(PoE 44~57VDC)input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
8*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
Redundant 12-58VDC(PoE 44~57VDC)input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
4*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
Redundant 12-58VDC(PoE 44~57VDC)input with polarity reverse/over-voltage/over-current protection
PoE item is Complies with IEEE802.3af PoE, IEEE802.3at PoE+
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE,4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
Support USB one key configuration and upgrading
DI/DO/RS485 are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and 19" Rack-mounting design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45 PoE, 8*1G Combo RJ45/SFP,4*1G/2.5G/10GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features:Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and 19" Rack-mounting design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant power 52-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Rack-mount hardware design
Operation temperature: -40 ℃ ~+75℃
24*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
16*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
8*10/100/1000Base-T RJ45 PoE, 4*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
8*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
4*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
Redundant 44-57VDC input with polarity reverse/over-voltage/over-current protection
Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++
DI/DO/RS485 and USB one key configuration & upgrading are optional
Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
Support Layer 2 management function: VLAN/VLAN /QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design
Operation temperature: -40 ℃ ~+75℃
DC12~58V (PoE DC 44~57V) input, redundant power supply with polarity reverse/over-voltage protection
PoE is Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standards
Powerful Dip switch function for easy LFP and parameter setting
Supports 10K Bytes Jumbo frame and 1M large buffer
4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
Wide operating temperature: -40℃ ~ +75℃
DC12~58V (PoE DC 44~57V) input, redundant power supply with polarity reverse/over-voltage protection
PoE is Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standards
Powerful Dip switch function for easy LFP and parameter setting
Supports 10K Bytes Jumbo frame and 1M large buffer
4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
Wide operating temperature: -40℃ ~ +75℃
Industrial 3in1 RS232/RS485/RS422 Serial to Fiber Converter (SC/ST/LC)
Support point to point ,point to multiple transmission.
Automatic signal detection rate.
Support power isolation, prevent current impact, effectively reduce signal interference.
Protect against electrical interference and chemical corrosion.
Transmission rate up to 256 kbps.
Support 12V-52V wide voltage,power comsuption＜1.5W.
1500W surge protection ,15KVelectrostatic protection.
Multi mode 5KM ( Dual fiber ) ,SM 20KM ( Single fiber,dual fiber ) .
Multi mode transmission distace up to 5KM, SM up to 120KM ( Customized ) .
ASI/SD/HD/3G-SDI Video to Fiber Optical Converter
Comply with DVB-ASI, SMPTE424M, SMPTE292M, and SMPTE259M (C) standards;
Use full digital processing technology, clear image, no color phase difference;
With APC circuit, constant output optical power, large dynamic range;
CWDM technology to achieve multi-channel signal transmission, large capacity, easy to upgrade;
The input has a cable balance to compensate for the loss of cable transmission;
With the output clock recovery reduction signal jitter circuit, it can handle the distortion signal very well;
Input / output cable transmission distance of up to 80m (BELDEN8281 cable);
Industrial grade design, modular design makes the equipment reliable and flexible;
Single multi-mode compatibility, no relay distance of up to 20 kilometers;
Wall-mounted, 1U rack type, plug-in card design, support 2U 16 slot chassis, double backup power supply;
Support for pathological signal (optional):
Mini 12G-SDI Video to Fiber Optical Converter
1 channel 12G-SDI Video/Data & Tally over optic fiber
Each SDI channel includes 1-channel audio embedded
SDI input/LC fiber output/SDI Loop
Automatic cable equalization to ensure signal integrity
Supports 12G / 6G / 3G / HD / SD
Compatible with DVB-ASI and AES10 (MADI)
Integrated reclock locks to SMPTE rates of 11.88Gbps,5.94Gbps,2.97Gbps,1.485Gbps or divide-by-1.001 sub-rates and 270Mbps
Directly compatible with 12G/6G/3G-SDI camera systems
Long transmission capability at least 10 km,up to 40 km
Type C 5V power input
Supports hot swapping and hot plugging
Full digital non-compression broadcast level transmission
Super optic dynamic range and free of adjustment prior to use
Fiber optic WDM/CWDM/DWDM technique
Support HDTV 4K*2K(3840*2160@60Hz),1080P,1080I,720P.
Mini DVI 4K30Hz Fiber Video Converter
Support HDCP protocol 1.4 standard;
Support for EDID automatic identification;
Support EDID memory storage function after power off;
Support RGB4:4:4,YUV4:4:4/4:2:2/4:2:0 video format;
Support dual fiber or single fiber transmission of 1km,compatible with multi-mode and single-mode modes;
Support status light indication;
Support power supply by charging bank;
Support the mutual communication with our mini 4K HDMI series;
Plug and play,without debugging;
HDMI 2.0 Multi-function Fiber Optical Converter
Video complies with the HDMI 2.0 specification;
Both transmitter and receiver have video loop-back sharing HD audio and video function;
Support EDID management function,support built-in EDID/automatic learning EDID switch;
Support 3D and HDR format video;
Support forward 3.5mm independent transmission,and have audio embedding/un-embedding function;
Support reverse 3.5mm audio transmission;
Support 1 channel keyboard and mouse control signal;
Support 1 channel bidirectional RS232/RS485 serial port data transmission;
Single-mode 10km transmission distance;
Support hot swap signal, plug and play, no setting required;
Compatible QSFP-DD 400GBASE-SR4 PAM4 850nm 100m DOM MPO-12/APC MMF Optical Transceiver Module, Support 2 x 200G-SR and 4 x 100G-SR
Max. Power Consumption 8W
Tested in Targeted Switches
Compliant with QSFP-DD CMIS Rev5.0, QSFP-DD MSA HW Rev 5.1
Support 4x 100G Breakout to QSFP-DR-100G
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
QSFP-DD Port,Compatible with QSFP+, QSFP28 and QSFP5
Class 1 Laser Safety and RoHS Compliant
Compatible QSFP-DD 400GBASE-DR4 PAM4 1310nm 500m DOM MPO-12/APC SMF Optical Transceiver Module, Support 4 x 100G-DR
Max. Power Consumption 9W
Tested in Targeted Switches
Compliant with QSFP-DD CMIS Rev5.0, QSFP-DD MSA HW Rev 5.1
Support 4x 100G Breakout to QSFP-DR-100G
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
QSFP-DD Port,Compatible with QSFP+, QSFP28 and QSFP5
Class 1 Laser Safety and RoHS Compliant
Compatible QSFP-DD 400GBASE-FR4 PAM4 1310nm 2km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 9W
Tested in Targeted Switches
Support QSFP-DD MSA CMIS Rev5.0, OIF 56G PAM4 and 100G Lambda MSA
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
QSFP-DD port is backward compatible with QSFP+, QSFP28 and QSFP56
Class 1 Laser Safety and RoHS Compliant
Compatible QSFP-DD 400GBASE-LR4 PAM4 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 9W
Tested in Targeted Switches
Support QSFP-DD MSA CMIS Rev5.0, OIF 56G PAM4 and 100G Lambda MSA
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
QSFP-DD port is backward compatible with QSFP+, QSFP28 and QSFP56
Class 1 Laser Safety and RoHS Compliant
IP68 outdoor wireless bridge with 100Mbps throughput, 10km range, -55~+85°C. Ideal for coastal surveillance, border patrol and maritime communication networks.
All-in-one high-integration outdoor box-type device, zero-site installation;
Supports IEEE 802.11a/n/ac protocols, 4.9GHz~6.1GHz frequency bands, and ≥100Mbit/s business throughput.
Remote Station built-in 28⁰ High-gain directional antennas 20dBi ,1x10/100/1000M RJ45( AC220V or PoE supply)
Advanced Y-shaped reinforced safety bracket that resists strong typhoons.
LED signal indicator lights for easy installation and adjustment without a computer, saving project time.
Management methods include MAC, IP, WEB, Telnet, SNMP; supports firmware updates.
IP68 sealing protection with load current protection and static protection.
Advanced technologies: OFDM, MIMO, BeamForming, seamless roaming, load balancing, Mesh networking, STBC, LDPC.
Compatible SFP 1000BASE-CWDM 1270nm~1610nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
CWDM for Multiple Applications
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety
Compatible SFP+ 10G DWDM ( C17 1563.86nm~C61 1528.77nm)100GHz 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.5W
Tested in Targeted Switch
Hot-pluggable SFP+ footprint
Supports 9.5 to 10.3Gb/s bit rates
Single 3.3V power supply
Maximum link length of 80km
DWDM wavelength EML transmitter, PIN photo-detector
Duplex LC connector
Built-in digital diagnostic functions
Case temperature range ：0°C to 70°C
Compatible QSFP-DD 400GBASE-SR8 PAM4 850nm 100m DOM MPO-16/APC MMF Optical Transceiver Module, Support 2 x 200G-SR4 and 8 x 50G-SR
Built-in Inphi DSP Chip, Max. Power Consumption 10W
Tested in Targeted Switches
Compliant with QSFP-DD MSA CMIS Rev4.0, OIF 56G PAM4
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3cd
8x 50G PAM4 Retimed 400GAUI-8 Electrical Interface
QSFP-DD Port is Backward Compatible with QSFP+, QSFP28
Compatible QSFP-DD 400GBASE-LR8 PAM4 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Built-in Inphi DSP Chip, Max. Power Consumption 10W
Tested in Targeted Switches
Compliant with QSFP-DD MSA CMIS Rev4.1, OIF 56G PAM4
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x 50G PAM4 Retimed 400GAUI-8 Electrical Interface
QSFP-DD Port is Backward Compatible with QSFP+, QSFP28 and QSFP56 Modules
Class 1 Laser Safety and RoHS Compliant
Compatible QSFP-DD 400GBASE-ER8 PAM4 1310nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Built-in Inphi DSP Chip, Max. Power Consumption 15.4W
Tested in Targeted Switches
Compliant with QSFP-DD MSA CMIS Rev4.0, OIF 56G PAM4
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3cn
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
QSFP-DD port is backward compatible with QSFP+, QSFP28
Compatible SFP 1000BASE-CWDM 1270nm~1610nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
CWDM for Multiple Applications
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety
Compatible SFP+ 10G DWDM ( C17 1563.86nm~C61 1528.77nm)100GHz 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.5W
Tested in Targeted Switch
Hot-pluggable SFP+ footprint
Supports 9.5 to 10.3Gb/s bit rates
Single 3.3V power supply
Maximum link length of 80km
DWDM wavelength EML transmitter, PIN photo-detector
Duplex LC connector
Built-in digital diagnostic functions
Case temperature range ：0°C to 70°C
Compatible SFP28 25G DWDM C17~C61 100GHz 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 2W
Tested in Targeted Switch
Compatible with CPRI option10 24.33Gbps and 25GBASE 25.78Gbps
Up to 10km transmission on SMF
C17 1563.86nm to C61 1528.77nm EML DWDM
SFP28 MSA compliant
Built-in digital diagnostic functions
Single +3.3V power supply
Operating case temperature: Commercial : 0 to +70 °C
Industrial : -40 to +85 °C
RoHS 6 Compliant
Compatible SFP28 25G CWDM 1270nm~1370nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.3W
Tested in Targeted Switch
Compatible with CPRI option10 24.33Gbps and 25GBASE 25.78Gbps
Up to 10km transmission on SMF
1270nm~1370nm DFB laser transmitter
SFP28 MSA compliant
Built-in digital diagnostic functions
Single +3.3V power supply
Operating case temperature: Commercial : 0 to +70 °C
Industrial : -40 to +85 °C
RoHS 6 Compliant
Compatible SFP28 25G CWDM 1470nm~1570nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 2W
Tested in Targeted Switch
Compatible with CPRI option10 24.33Gbps and 25GBASE 25.78Gbps
Up to 10km transmission on SMF
1470nm~1570nm DML laser transmitter
SFP28 MSA compliant
Built-in digital diagnostic functions
Single +3.3V power supply
Operating case temperature: Commercial : 0 to +70 °C
Industrial : -40 to +85 °C
RoHS 6 Compliant
100Ghz 4~16CH DWDM MUX DEMUX TFF Type
Passive Transparent Multiplexing
100GHz 4~16ch DWDM MUX DEMUX
Compatible with ITU-T G.694 100GHZ grid,
Support low insertion loss( wavelength ports＜4.0dB).
The Solution Can be Customized per Customer Application
150GHz 32CH DWDM MUX DEMUX 1529.553nm-1566.723nm with Monitor Port，LC/UPC 1U Rack
Passive Transparent Multiplexing
150GHz 32ch DWDM MUX DEMUX from 1529.553nm-1566.723nm
Compatible with ITU-T G.694. 150GHZ grid,
Support low insertion loss( wavelength ports＜6.0dB).
Support 800G x 32ch business in DWDM transfer system
The Solution Can be Customized per Customer Application
Dual Fiber 40CH C21-C60 DWDM MUX DEMUX, With 1310nm and Monitor Port, LC/UPC, 1U Rack
Passive Transparent Multiplexing
100GHz 40ch DWDM MUX DEMUX from C21 to C60(1560.61nm~1529.55nnm)
Compatible with ITU-T G.694. 100GHZ grid,
Support low insertion loss( wavelength ports＜3.5dB).
The Solution Can be Customized per Customer Application
75GHz 64CH DWDM MUX DEMUX 1528.871nm-1566.621nm with Monitor Port,LC/UPC 1U Rack
Passive Transparent Multiplexing
75GHz 64ch DWDM MUX DEMUX from 1528.871nm-1566.621nm
Compatible with ITU-T G.694.75GHZ grid,
Support low insertion loss( wavelength ports＜6.5dB).
The Solution Can be Customized per Customer Application
Dual fiber 96CH C14-H61 DWDM MUX DEMUX, 150GHZ AAWG, with 1310nm and Monitor Port, LC/UPC 2U Rack
Passive Transparent Multiplexing
DWDM AAWG 96CH MUX/ DEMUX from C14 to H61(1566.31nm~1528.38nnm),
Compatible with ITU-T G.694.150GHZ grid,
support low insertion loss( wavelength ports＜7.0dB).
The Solution Can be Customized per Customer Application
4/8 Channels CWDM Mux Demux,1270-1610nm,Dual or Single Fiber LC/UPC LGX Box and 4-slots 1U Rack Type
Passive Transparent Multiplexing
CWDM MUX DEMUX 4CH Dual Fiber LC/UPC LGX Box
CWDM MUX DEMUX 8CH Dual Fiber LC/UPC LGX Box
CWDM MUX DEMUX 8CH Single Fiber LC/UPC LGX Box
The Solution Can be Customized per Customer Application
Compatible with ITU Grid and Interconnects with All Optical Networking Products
8 Channels CWDM Mux Demux,1270-1610nm,Dual or Single Fiber LC/UPC LGX Box and 2-slots 1U Rack Type
Passive Transparent Multiplexing
CWDM MUX DEMUX 8CH Dual Fiber LC/UPC LGX Box
CWDM MUX DEMUX 8CH Single Fiber LC/UPC LGX Box
The Solution Can be Customized per Customer Application
Compatible with ITU Grid and Interconnects with All Optical Networking Products
8/18 Channels CWDM Mux Demux,1270-1610nm,Dual or Single Fiber LC/UPC 19" 1U Rack Mount
Passive Transparent Multiplexing
CWDM MUX DEMUX 8CH Dual Fiber LC/UPC 1U Rack
CWDM MUX DEMUX 18CH Dual Fiber LC/UPC 1U Rack
CWDM MUX DEMUX 8CH Single Fiber LC/UPC 1U Rack
The Solution Can be Customized per Customer Application
Compatible with ITU Grid and Interconnects with All Optical Networking Products
Compatible 40G QSFP+ Active Optical Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft) 10m (33ft) 15m (49ft) 20m (66ft) 25m (82ft) 30m (98ft) 50m (164ft)
Max. Power Consumption 1.4W
Tested in Targeted Switches
Minimum Bend Radius 30mm
Offers a Cost-effective Way
Hot Pluggable QSFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible 40G QSFP+ Passive Direct Attach Copper Cable 0.5m (2ft) 1m (3ft) 1.5m (5ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft)
Max. Power Consumption 0.5W
Tested in Targeted Switches
Minimum Bend Radius 35mm for Flexible Routing
Simplifies the Patching
Hot Pluggable QSFP+ MSA Compliant
Low Insertion Loss and Ultra-low Crosstalk
RoHS Compliant
Compatible 40G QSFP+ to 4 x 10G SFP+ Active Optical Breakout Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft) 10m (33ft) 15m (49ft) 20m (66ft) 25m (82ft) 30m (98ft)
Max. Power Consumption 1.4W @QSFP+,0.8W @SFP+
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Supports 40G to 4x 10G Ethernet
Offers a Cost-effective Way for Short Links
Hot Pluggable QSFP+ and SFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible 2 25G SFP28 Passive Direct Attach Copper Twinax Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) ...
Max. Power Consumption 0.5W
Tested in Targeted Switches
Minimum Bend Radius 22.5mm for Flexible Routing
Offers a Cost-effective Way for Short Links
Hot Pluggable SFP28 MSA Compliant
Low Insertion Loss and Ultra-low Crosstalk
RoHS Compliant
Compatible 25G SFP28 Active Optical Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft) 10m (33ft) 15m (49ft) 20m (66ft) 25m (82ft) 30m (98ft)
Max. Power Consumption 0.8W
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Offers a Cost-effective Way for Short Links
Hot Pluggable SFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible 10G SFP+ Active Optical Cable 1m (3ft) 2m (7ft) 3m (10ft) 5m (16ft) 7m (23ft) 10m (33ft) 15m (49ft) 20m (66ft) 25m (82ft) 30m (98ft)
Max. Power Consumption 0.8W
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Hot Pluggable SFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable 0.5m (2ft),1m (3ft),1.5m (5ft),2m (7ft),2.5m (8ft),3m (10ft),4m (13ft),5m (16ft),6m (20ft),7m (23ft)
Max. Power Consumption 0.1W
Tested in Targeted Switches
Support 10G Ethernet
Cost-effective Short Links Solution
Minimum Bend Radius 23mm for Flexible Routing
Compatible 100G QSFP28 to QSFP28 Passive Direct Attach Copper Twinax Cable 0.5m (2ft),1m (3ft),1.5m (5ft),2m (7ft),2.5m (8ft),3m (10ft),3.5m (11ft),5m (16ft)
Max. Power Consumption 0.5W
Tested in Targeted Switches
Supports 100G Ethernet
Minimum Bend Radius 33.5mm for Flexible Routing
Offers a Cost-effective Way for Short Links
Compliant with QSFP28/SFP28 MSA and RoHS
Low Insertion Loss and Ultra-low Crosstalk
Compatible 100G QSFP28 to 4x 25G SFP28 Passive Direct Attach Copper Twinax Cable 0.5m (2ft),1m (3ft),1.5m (5ft),2m (7ft),2.5m (8ft),3m (10ft),3.5m (11ft),5m (16ft)
Max. Power Consumption 0.5W
Tested in Targeted Switches
Supports 100G to 4x 25G Ethernet
Minimum Bend Radius 30mm for Flexible Routing
Offers a Cost-effective Way for Short Links
Compliant with QSFP28/SFP28 MSA and RoHS
Low Insertion Loss and Ultra-low Crosstalk
Compatible 100G QSFP28 to 4x25G SFP28 Active Optical Breakout Cable 1m (3ft)2m (7ft)3m (10ft)5m (16ft)7m (23ft)10m (33ft)15m (49ft)20m (66ft)25m (82ft)30m (98ft)50m (164ft)..
Max. Power Consumption 2.2W
Tested in Targeted Switches
Minimum Bend Radius 30mm for Flexible Routing
Supports 100G to 4x 25G Ethernet Interoperability
Simplifies the Patching and Offers a Cost-effective Way for Short Links
Hot Pluggable QSFP28 and SFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible QSFP+ 40GBASE-ZR4 1310nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 4.5W
Tested in Targeted Switches
High-Speed Electrical Interface Compliant to IEEE 802.3ba
Compliant to SFF-8436 and QSFP MSA
Hot Pluggable QSFP+ Form Factor
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring Capability
Compatible QSFP+ 40GBASE-ER4 1310nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 3.5W
Tested in Targeted Switches
High-Speed Electrical Interface Compliant to IEEE 802.3ba
Compliant to SFF-8436 and QSFP MSA
Hot Pluggable QSFP+ Form Factor
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring Capability
Compatible SFP28 25GBASE-U BiDi 1330nm-TX/1270nm-RX 40km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.2W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-U BiDi 1330nm-TX/1270nm-RX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.2W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-U BiDi 1270nm-TX/1330nm-RX 40km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.2W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-U BiDi 1270nm-TX/1330nm-RX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.2W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-U BiDi 1330nm-TX/1270nm-RX 10km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-U BiDi 1270nm-TX/1330nm-RX 10km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switch
High-speed Connectivity Compliant to IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible QSFP28 100GBASE-ER4 1310nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Power Consumption 4.5W
Tested in Targeted Switches for Superior Performance
High-Speed Electrical Interface Compliant to IEEE 802.3ba
Adopt BOX Packaging with Reliability & Airtightness
Applied to High Bandwidth and Long-distance Connectivity
Hot Pluggable QSFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring for Strong Diagnostics
L3 Managed Ethernet Switch,48x10/100/1000/2500Base-T RJ45 (POE+ option) with 2x40G QSFP+ and 4x10G SFP+
Input Voltage：AC 100-240V 50/60Hz
Operating Temperature：-10℃ ~ +50℃
Enclosure：Metal, fan for heat dissipating
Certification：CE/FCC/RoHS
ESD：8KV-15KV
MTBF：100000H
L3 Managed Multi Gigabit Ethernet 2.5G High Speed Switch 16x10/100/1000/2500Base-T RJ45(POE optional) with 2x10/100/1000Base-T RJ45 and 2x 10Gbase-X SFP+ slot
Input Voltage: AC 100~240V/50-60Hz
Operating Temperature: -10℃ to +50℃
Cooling Method: Fan cooling
Inspection Report: CE/FCC/RoHS
Electrostatic Discharge (ESD): 8KV-15KV
MTBF (Mean Time Between Failures): 100,000 hours
L3 Managed Multi Gigabit Ethernet 2.5G High Speed Switch 24x10/100/1000/2500Base-T RJ45(POE optional) with 6 x 10Gbase-X SFP+ slot
Input Voltage: AC 100~240V/50-60Hz
Operating Temperature: -10℃ to +50℃
Cooling Method: Fan cooling
Inspection Report: CE/FCC/RoHS
Electrostatic Discharge (ESD): 8KV-15KV
MTBF (Mean Time Between Failures): 100,000 hours
9-Ports Multi Gigabit 2.5G High Speed Switch 8x10/100/1000/2500Base-T RJ45 with 1x10GBase-X SFP+, Fanless, DC 12V input
Input Voltage: DC 12V
Operating Temperature: -10°C to +55°C
Cooling Method: Fanless design, natural convection cooling
Certifications: CE/FCC/RoHS
ESD Protection: 8kV to 15kV
MTBF: 100,000 hours
6-Ports Multi Gigabit 2.5G High Speed Switch 5x10/100/1000/2500Base-T RJ45 with 1x10GBase-X SFP+, Fanless, DC 12V input
Input Voltage: DC 12V
Operating Temperature: -10°C to +55°C
Cooling Method: Fanless design, natural convection cooling
Certifications: CE/FCC/RoHS
ESD Protection: 8kV to 15kV
MTBF: 100,000 hours
6-Ports Multi Gigabit 2.5G High Speed Switch 4x10/100/1000/2500Base-T RJ45 with 2x10GBase-X SFP+, Fanless, DC 12V input
Input Voltage: DC 12V
Operating Temperature: -10°C to +55°C
Cooling Method: Fanless design, natural convection cooling
Certifications: CE/FCC/RoHS
ESD Protection: 8kV to 15kV
MTBF: 100,000 hours
6-Ports Web Managed Multi Gigabit 2.5G High Speed Switch 4x10/100/1000/2500Base-T RJ45 with 4x10GBase-X SFP+, Fanless, DC 12V input
Input Voltage: DC 12V
Operating Temperature: -10°C to +55°C
Cooling Method: Fanless design, natural convection cooling
Certifications: CE/FCC/RoHS
ESD Protection: 8kV to 15kV
MTBF: 100,000 hours
9-Ports Multi Gigabit 2.5G High Speed Switch 8x10/100/1000/2500Base-T RJ45 with 1x10GBase-X SFP+, Fanless, DC 12V input
Input Voltage: DC 12V
Operating Temperature: -10°C to +55°C
Cooling Method: Fanless design, natural convection cooling
Certifications: CE/FCC/RoHS
ESD Protection: 8kV to 15kV
MTBF: 100,000 hours
9-Ports Web Managed Multi Gigabit 2.5G High Speed PoE+ Switch 8x10/100/1000/2500Base-T RJ45 PoE+ @135W with 1x10GBase-X SFP+, Fanless, AC 100~240V/50-60HZ input
Input Voltage: AC110~245V 50/60Hz
Operating Temperature: -10℃ ~ +55℃
Surge Protection: 6KV/4KV
Test Report: CCC, RoHS, FCC, CE
6-Ports Web Managed Multi Gigabit 2.5G High Speed PoE+ Switch 4x10/100/1000/2500Base-T RJ45 PoE+ @72W with 2x10GBase-X SFP+, Fanless, AC 100~240V/50-60HZ input
Input Voltage: AC110~245V 50/60Hz
Operating Temperature: -10℃ ~ +55℃
Surge Protection: 6KV/4KV
Test Report: CCC, RoHS, FCC, CE
8×10/100/1000M RJ45 + 2×SFP flexible ports
9-48VDC(PoE:44~57V) redundant power input
Supports STP/RSTP/MSTP,ring recovery <20ms failover time
Layer 2 QoS/VLAN/IGMP Snooping for critical traffic
Fanless DIN-rail design, 500K hrs MTBF
Support for one-button recovery of factory settings
Support SNMP V1/V2c network management platform
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
4×10/100/1000M RJ45 PoE + 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
Compatible SFP 2.5GBASE-LX 1310nm 15km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switch
1310nm DFB 2.5G up to 15km
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to SFF-8472 v9.5
Class 1 FDA Laser Safety and RoHS Compliant
8×10/100/1000M RJ45 PoE + 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
8×10/100/1000M RJ45+ 2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
4×10/100/1000M RJ45+2×SFP flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
8×10/100/1000M RJ45 PoE + 1×SFP & 1x10/100/1000M RJ45 flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
4×10/100/1000M RJ45 PoE + 1×SFP & 1x10/100/1000M RJ45 flexible ports
44-57VDC(no-PoE:9~48V) redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
8×10/100/1000M RJ45
Paired with PLCs in industrial automation control system networks.
9~48VDC redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
5×10/100/1000M RJ45
Paired with PLCs in industrial automation control system networks.
9~48VDC redundant power input
Fanless DIN-rail design, 500K hrs MTBF
One-touch VLAN and 250m extended 10M transmission
-40°C~+75°C operation with IP40 industrial protection
IEC 61000-4-5 Level 4 surge protection
CE/FCC/RoHS compliance
10GBase-T RJ45 to 10GBase-X SFP+ 10Gigabit Ethernet Media Converter
Provide one 10 Gigabit optical port, one 10 Gigabit adaptive electrical port
Copper port supports 1000Base-T, 2.5/5/10GBase-T auto-negotiation
IEEE802.3x flow control supporting full duplex
Support half-duplex back pressure flow contr
Working wavelength 850nm, 1310nm, 1550nm optional
Provide multiple fiber transmission modes such as dual fiber multimode, dual fiber single mode and single fiber single mode
Low power consumption, low heat, can work stably for a long time
2.5GBase-T RJ45 to 2.5GBase-X SFP+ 10Gigabit Ethernet Media Converter
Provide one 2.5 Gigabit optical port, one 2.5 Gigabit adaptive electrical port
Copper port supports 1000Base-T, 2.5GBase-T auto-negotiation
IEEE802.3x flow control supporting full duplex
Support half-duplex back pressure flow contr
Working wavelength 850nm, 1310nm, 1550nm optional
Provide multiple fiber transmission modes such as dual fiber multimode, dual fiber single mode and single fiber single mode
Low power consumption, low heat, can work stably for a long time
1000Base-X to 10/100/1000Base-T RJ45 PoE Gigabit Ethernet Media Converter,1310nm SM 20km SC
Support 1000Base-FX optical fiber transmission standard
The longest transmission distance can reach 80Km
10/100/1000Mbps, full duplex/half duplex auto negotiation
Support LFP (Link Failover) function
One-key electric port 10M mandatory speed limit
Support half-duplex back pressure control and full-duplex flow control
Support IEEE802.3at/at standard
1000Base-X SFP to 10/100/1000Base-T RJ45 PoE Gigabit Ethernet Media Converter
Support 1000Base-FX optical fiber transmission standard
The longest transmission distance can reach 120Km
10/100/1000Mbps, full duplex/half duplex auto negotiation
Support LFP (Link Failover) function
One-key electric port 10M mandatory speed limit
Support half-duplex back pressure control and full-duplex flow control
Support IEEE802.3at/at standard
10GBase-X to 10Base-X Desktop 10Gigabit Ethernet Media Converter
10G Fiber to Fiber Converter
Support Jumbo Frame
Support hot plugging
Transparent Transport and very low delay
3R function（Regenration , Reshaping , Retiming ）
2U-Rackmount 19-inch Ethernet Media Converter Chassis with 16 slot,dual AC 220V 50/60Hz power supply
2U rackmount design for 19-inch racks.
Support for udatek’s media converter.
Dual power supply options available, either 220V AC or 48V DC.
Supports hot-swappable standards for easy maintenance and upgrades.
Features high-security protection against power surges.
Suitable for working environments ranging from -20℃ to 60℃
2U-Rackmount 19-inch Ethernet Media Converter Chassis with 14 slot,dual AC 220V 50/60Hz power supply
2U rackmount design for 19-inch racks.
Support for udatek’s media converter.
Dual power supply options available, either 220V AC or 48V DC.
Supports hot-swappable standards for easy maintenance and upgrades.
Features high-security protection against power surges.
Suitable for working environments ranging from -20℃ to 60℃
Compatible QSFP28 100GBASE-LR4 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 3.5W
Tested in Targeted Switches
Hot Pluggable QSFP28 MSA Compliant
High-Speed Electrical Interface Compliant to IEEE 802.3 100GBASE-LR4
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring Capability
Compatible QSFP28 100GBASE-SR4 850nm 100m DOM MPO-12/UPC MMF Optical Transceiver Module, Support 4 x 25G-SR
Max. Power Consumption 2.5W
Tested in Targeted Switches
High-Speed Electrical Interface Compliant to IEEE 802.3bm
Support 100G to 4x25G Breakout Application
Hot Pluggable QSFP28 MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible QSFP+ 40GBASE-LR4 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 2.5W
Tested in Targeted Switches
Electrical Interface Compliant to IEEE 802.3ba
Compliant to SFF-8436 and QSFP MSA
Hot Pluggable QSFP+ Form Factor
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring
Compatible QSFP+ 40GBASE-SR4 850nm 150m DOM MPO-12/UPC MMF Optical Transceiver Module, Support 4 x 10G-SR
Max. Power Consumption 1.5W
Tested in Targeted Switches
Electrical Interface Compliant to IEEE 802.3ba
Support 40G to 4x 10G Breakout Application&Interface
Compliant to SFF-8436 and QSFP MSA
Hot Pluggable QSFP+ Form Factor
Class 1 FDA Laser Safety and RoHS Compliant
Digital Optical Monitoring
Compatible SFP28 25GBASE-LR 1310nm SMF 10km DOM Duplex LC/UPC Optical Transceiver Module
Max. Power Consumption 1.2W
Tested in Targeted Switch
IEEE-compliant 25G Interfaces
Compliant to IEEE 802.3by and IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP28 25GBASE-SR 850nm MMF 100m DOM Duplex LC/UPC Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switch
IEEE-compliant 25G Interfaces
Compliant to IEEE 802.3by and IEEE 802.3cc
Hot Pluggable SFP28 MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP+ 10GBASE-BX40-D BiDi 1270nm-RX/1330nm-TX 40km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
BIDI SFP+ 1270nm/1330nm 11.3G/s up to 40km
Tested in Targeted Switches
Double Your Bandwidth by Using Only One Fiber
Hot Pluggable SFP+ MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP+ 10GBASE-BX40-U BiDi 1270nm-TX/1330nm-RX 40km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
BIDI SFP+ 1270nm/1330nm 11.3G/s up to 40km
Tested in Targeted Switches
Double Your Bandwidth by Using Only One Fiber
Hot Pluggable SFP+ MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP+ 10GBASE-BX10-D BiDi 1270nm-RX/1330nm-TX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
BIDI SFP+ 1270nm/1330nm 11.3G/s up to 20km
Tested in Targeted Switches
Double Your Bandwidth by Using Only One Fiber
Hot Pluggable SFP+ MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP+ 10GBASE-BX20-U BiDi 1270nm-TX/1330nm-RX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
BIDI SFP+ 1270nm/1330nm 11.3G/s up to 20km
Tested in Targeted Switches
Double Your Bandwidth by Using Only One Fiber
Hot Pluggable SFP+ MSA Compliant
Digital Optical Monitoring Capability
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP+ 10GBASE-ZR/ZW and OTU2e 1550nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.8W
1550nm EML 11.3G/s up to 80km
Tested in Targeted Switches
Hot Pluggable SFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
IEEE 802.3ae Compliant
Compatible SFP+ 10GBASE-ER 1550nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.5W
1550nm EML 11.3G/s up to 40km
Tested in Targeted Switches
Hot Pluggable SFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
IEEE 802.3ae Compliant
Compatible SFP+ 10GBASE-ER 1310nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1.5W
1310nm DFB 11.3G/s up to 40km
Tested in Targeted Switches
Hot Pluggable SFP+ MSA Compliant
Class 1 FDA Laser Safety and RoHS Compliant
IEEE 802.3ae Compliant
Compatible 10GBASE-SR SFP+ MMF 850nm 300m LC DOM Transceiver Module
Tested in Targeted Switches
850nm VCSEL 10.3125G/s up to 300m
Max. Power Consumption 1W
Small 10G Form Factor for Greatest Density per Chassis
Hot Pluggable SFP+ MSA and RoHS Compliant
Digital Optical Monitoring
Compatible SFP 2.5GBASE-SX 850nm 300m DOM Duplex LC/UPC MMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switch
850nm VESEL 2.5G up to 300m
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to SFF-8472 v9.5
Class 1 FDA Laser Safety and RoHS Compliant
Compatible 1000BASE-BX SFP Transceiver Module (SMF, 1490nm-RX/1550nm-TX, 120km, LC, DOM)
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 120km
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible 1000BASE-BX SFP Transceiver Module (SMF, 1490nm-TX/1550nm-RX, 120km, LC, DOM)
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 120km
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX80-UI BiDi 1490nm-RX/1550nm-TX 80km DOM Simplex LC/UPC SMF (Industrial) Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 80km
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX80-UI BiDi 1490nm-TX/1550nm-RX 80km DOM Simplex LC/UPC SMF (Industrial) Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 80km
Industrial Temperature Range -40 to 85°C (-40 to 185°F
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible 1000BASE-BX SFP Transceiver Module (SMF, 1490nm-RX/1550nm-TX, 80km, LC, DOM)
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 80km
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible 1000BASE-BX SFP Transceiver Module (SMF, 1490nm-TX/1550nm-RX, 80km, LC, DOM)
Max. Power Consumption 1W
Tested in Targeted Switches
BiDi 1490nm/1550nm 1.25G up to 80km
Double Bandwidth On One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring supported
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX20-U BiDi 1310nm-RX/1550nm-TX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module (Industrial)
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX20-U BiDi 1310nm-TX/1550nm-RX 20km DOM Simplex LC/UPC SMF (Industrial) Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX3-D BiDi 1310nm-RX/1550nm-TX 3km DOM Simplex LC/UPC SMF Optical Transceiver Module (Industrial)
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX3-U BiDi 1310nm-TX/1550nm-RX 3km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Compatible 10GBASE-T SFP+ Copper 30m RJ-45 Transceiver Module
•Marvell Chip, Power Consumption 2.9W
•Tested in Targeted Switches
•RJ45 Connectors, 10G Bandwidth over Cat6a/7 Cable
•Hot Pluggable SFP+ MSA , IEEE 802.3an/az Compliant
Compatible SFP 1000BASE-BX3-U BiDi 1310nm-RX/1550nm-TX 3km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Compatible SFP 1000BASE-BX3-U BiDi 1310nm-TX/1550nm-RX 3km DOM Simplex LC/UPC SMF Optical Transceiver Module (Industrial)
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-BX20-D BiDi 1310nm-RX/1550nm-TX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Compatible SFP 1000BASE-BX20-U BiDi 1310nm-TX/1550nm-RX 20km DOM Simplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
WDM 1310nm/1550nm 1.25G/s up to 10/20km
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Save Half Fiber by Using Only One Fiber
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-ZX 1550nm 80km DOM Duplex LC/UPC SMF ( Industrial) Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
1550nm DFB SMF 1.25G/s up to 80km
Hot Pluggable SFP MSA Compliant
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-ZX 1550nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
1550nm DFB SMF 1.25G/s up to 80km
Hot Pluggable SFP MSA Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-LH 1310nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
1310nm DFB SMF 40km
Hot Pluggable SFP MSA Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-LX/LH 1310nm 10/20km DOM Duplex LC/UPC SMF (Industrial) Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
1310nm FP SMF 10/20km
Hot Pluggable SFP MSA Compliant
Industrial Temperature Range -40 to 85°C (-40 to 185°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-LX 1310nm 20km DOM Duplex LC/UPC SMF Optical Transceiver Module
Max. Power Consumption 1W
Tested in Targeted Switches
1310nm FP SMF 10/20km
Hot Pluggable SFP MSA Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 1000BASE-SX 850nm 550m DOM Duplex LC/UPC MMF Optical Transceiver Module
Max. Power Consumption 0.8W
Tested in Targeted Switches
850nm VESEL MMF 550m
Hot Pluggable SFP MSA Compliant
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Digital Optical Monitoring Capability
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant
Compatible SFP 10/100/1000BASE-T Copper 100m RJ-45 Transceiver Module
• Built-in Marvell Chip, Max. Power Consumption 1.2W
• Tested in Targeted Switches
• RJ45 Connectors, 10/100/1000M Bandwidth
• Hot Pluggable SFP MSA Compliant
• Fully Metallic Enclosure for Low EMI
• CE,FCC,RoHS Compliant
• 5 Years warranty
Compatible SFP 1000BASE-T Copper 100m RJ-45 Transceiver Module
• Tested in Targeted Switches
• RJ45 Connectors, 1000M Bandwidth over Copper Infrastructure
• Transmission distance up to 100m
• Hot Pluggable SFP MSA Compliant
• Compliant to IEEE 802.3 Gigabit Ethernet
• CE,FCC,RoHS Compliant
Compatible SFP SGMII 100BASE-T Copper 100m RJ-45 Transceiver Module
• Tested in Targeted Switches
• RJ45 Connectors, 100M Bandwidth over Copper Infrastructure
• Transmission distance up to 100m
• Hot Pluggable SFP MSA Compliant
• Compliant to IEEE 802.3 Gigabit Ethernet
• CE,FCC,RoHS Compliant
6-Ports Multi Gigabit 2.5G High Speed PoE+ Switch 4x10/100/1000/2500Base-T RJ45 PoE+ @72W with 2x10GBase-X SFP+, Fanless, AC 100~240V/50-60HZ input
Input Voltage: AC110~245V 50/60Hz
Operating Temperature: -10℃ ~ +55℃
Surge Protection: 6KV/4KV
Test Report: CCC, RoHS, FCC, CE
DC12~58V (PoE DC 44~57V) input, redundant power supply with polarity reverse/over-voltage protection
PoE is Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standards
Powerful Dip switch function for easy LFP and parameter setting
Supports 10K Bytes Jumbo frame and 1M large buffer
4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
Wide operating temperature: -40℃ ~ +75℃
DC12~58V (PoE DC 44~57V) input, redundant power supply with polarity reverse/over-voltage protection
PoE is Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standards
Powerful Dip switch function for easy LFP and parameter setting
Supports 10K Bytes Jumbo frame and 1M large buffer
4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
Wide operating temperature: -40℃ ~ +75℃
• Easy-to-pair(one-key to pair)
• Digital LED Display
• Working temperature:-30～65℃
• IP65 protection
• Optimized Video Transmission Protocol
• Simple Installation and Maintenance(POE 24V)
• Web/Telnett management
• MAC address control
• WEP encryption 64/128bits,WPA,WPA2,802.1x
• Digital LED Display
• Working temperature:-30～65℃
• IP65 protection
• Optimized Video Transmission Protocol
• Simpler Construction
• Simple Installation and Maintenance(POE 24V)
• Web/Telnett management
• MAC address control
• WEP encryption 64/128bits,WPA,WPA2,802.1x
• Digital LED Display
• Working temperature:-30～65℃
• IP65 protection
• Optimized Video Transmission Protocol
• Simpler Construction
• Simple Installation and Maintenance(POE 24V)
• Web/Telnett management
• MAC address control
• WEP encryption 64/128bits,WPA,WPA2,802.1x
