Home > Product > Optical Networking > Active Optical-layer Platform > D6OP25G20H

D6OP25G20H

DWDM EDFA Card 48/96CH (1528nm~1568nm) PA G25/20 Gain:25dB +-3dB,Max output 20dB, LC/UPC used in D6000 series take one slot

C-band DWDM amp, OSC pass
+23 dBm out, –35 dBm in
Booster, 2-stage line, pre-amp
MON port; pump current/power/temp, in/out power, module temp
Pump on/off, AGC/APC, power set
SNMP CLI Web NetView

Product Details

EDFA Optical Amplification Card for D6000-CH1U(2U/4U) Chassis

D6OP25G20H

DWDM EDFA Card 48/96CH (1528nm~1568nm) PA G25/20 Gain:25dB +-3dB,Max output 20dB, LC/UPC used in D6000 series take one slot

Product Overview

Engineered for ultra-long-haul DWDM networks, the card integrates high-isolation pump diodes in a hermetic package with proprietary ATC (Automatic Temperature Control) and ACC (Automatic Current Control) loops, guaranteeing sub-±0.1 dB power stability over −5 °C to 65 °C. A precision-spliced GFF (Gain-Flattening Filter) and low-loss micro-optics yield ≤1.0 dB gain ripple and ≤4.5 dB noise figure across the C-band. User-selectable APC (Automatic Power Control) and AGC (Automatic Gain Control) modes deliver constant output power or flat gain, enabling transparent, repeater-less spans >150 km without system re-design.

Specifications

System Parameters		Technical Specifications
Wavelength Range		Standard type: 1529nm~1561nm Applicable to 40 wavelength(100GHz) or 80 wavelength(50GHz)DWDM system
		Extension type: 1528nm~1568nm Applicable to 48 wavelength(100GHz) or 96 wavelength(50GHz)DWDM system
Input Power Range		Power Amplification (BA): -15dBm~+5dBm Line Amplification (LA): -35dBm~-7dBm Pre-Amplification (PA): -35dBm~-7dBm
Gain Range		10dB~30dB
Noise Figure		4.5dB~6dB
Gain Flatness		1.0dB
Input/Output Isolation		30dB
Input/Output Return Loss		45dB
Output Pump Leakage		-30dBm
Polarization-Dependent Loss		0.5dB
Polarization Mode Dispersion		0.5ps
Management Functions		CDR Function (Real-time DDM Monitoring) Adaptive Setting for Different Rates Unidirectional or Bidirectional Business Setting
Management Methods		Web、NetView
Board Dimensions		156 （W）× 20（H）× 225（D）（mm）
Environmental Requirements	Operating Temperature	-10℃ ~ 50℃
	Storage Temperature	-40℃ ~ 80℃
	Relative Humidity	5% ~ 95% (non-condensing)
Safety and EMC Compliance		Complies with CE,FCC,RoHs standards
Power Consumption		<30W

Ordering information

D6000-CH1U-A : 1U Rack，4-Slot,Fans Unit, Daul power(AV90~ 264V or DC -48~ -60 V), 482(W)×44(H)×320(D)
D6000-CH2U-A : 2U Rack，8-Slot,Fans Unit, Daul power(AV90~ 264V or DC -48~ -60 V),486(W) ×86(H)×352(D)
D6000-CH4U-A : 5U Rack，16-Slot,Fans Unit, Daul power(AV90~ 264V or DC -48~ -60 V),483(W)×178(H)×280(D)
D6N :network Management card, With 3XSFP port, 2XRJ45, 1X Console, And Netview Management Soft V1.0, Supprt SNMP\CLI\WEB\NMS management Used in D6000 take 1 slot）
D610G3R : 10G Transponder Card, 4*10Gbit/s Transponder(OEO) Card,Support 2.5~10G, 3R,8*SFP+, used in D6000 series take one slot
D625G : 25G Transponder Card, 4*25Gbit/s Transponder(OEO) Card,Support 1.25~25.76G, 8*SFP28, used in D6000 series take one slot
D6100G:100G Transponder Card, 4*100Gbit/s Transponder(OEO) Card,Support 100G,4*QSFP28, used in D6000 series, take one slot
D640G10:40G Muxponder Card, 4*10Gbit/s TO 40Gbit/s Transponder(OEO) Card,,4*SFP+ TO 1*QSFP+ used in D6000 series take one slot
D6100G25G:100G Muxponder Card, 4*25Gbit/s TO 100Gbit/s Transponder(OEO) Card,,4*SFP28 TO 1*QSFP28 used in D6000 series take one slot
D6200G24Q:200G Muxponder Card,2channels 200Gbit/s TO 2X100Gbit/s Muxponder Card 2ch* 200G*CFP2 TO 2*100G QSFP28 used in D6000 series take two slot
D6OP25G20H: DWDM EDFA Card 48/96CH (1528nm~1568nm) PA G25/20 Gain:25dB +-3dB,Max output 20dB, LC/UPC used in D6000 series take one slot
D6OB15G20H: DWDM EDFA Card 48/96CH (1528nm~1568nm) BA G15/20 Gain15dB +-3dB,Max output 20dB, LC/UPC used in D6000 series take one slot
D6OL15G20H: DWDM EDFA Card 48/96CH (1528nm~1568nm) LA G25/20 Gain25dB +-3dB,Max output 20dB, LC/UPC used in D6000 series take one slot
D6SOA14B:100G SOA Card,2channel 100G 1310nm SOA optcal Amplifier G14/10 Gain10dB,Max output 10dB, LC/UPC used in D6000 series take one slot
D6RFA-G12: DWDM RFA Raman amplifier The maximum RFA gain is 12dB adjustable, the minimum RX threshold is -40, and the LC/UPC take 2 slot
D6RFA-G14:DWDM RFA Raman amplifier The maximum RFA gain is 14dB adjustable, the minimum RX threshold is -40, and the LC/UPC take 2 slot
D6OLPA:OLP Card, Optical line 1+1 protection LC/UPC,dual fiber used in used in D6000 series take one slot
D6OLPABD:OLP Card,Optical line 1+1 protection LC/UPC，Bi-direction used in used in D6000 series take one slot

Parking List

Device
Installation accessories
User;s Manual
Warranty Card & Conformity Certificate

Certifications

CE/FCC /RoHS