400 G Trans-Muxponder
D8000-D841
4×100 G → 1×400 G Trans-Muxponder for D8000-CH1U Managed Chassis
Product Overview
A single-slot blade that aggregates four 100 G QSFP28 client signals into one pluggable 400 G CFP2 coherent line interface. Tunable C-band optics and software-selectable modulation allow seamless integration with existing DWDM MUX/DeMUX, delivering 400 G waves over loss-limited or fiber-scarce spans while maintaining carrier-grade performance.
Specifications
|
Parameters | Describe |
|
Maximum capacity of single board |
4*100G two-way transmission 4*100G one-way transmission |
|
Wavelength (frequency) range |
DWDM:1529.16mm-1567.14nm(191.3THz-196.05THz) |
|
Adjustment method |
DP-QPSK@100G; DP-16QAM@200G; DP-8QAM@200G; DP-QPSK@200G; |
|
DP-8QAM@300G: DP-16QAM@400G |
|
Line side protocol |
Open ROADM/Open ZR+/SCFEC |
|
Dispersion tolerance |
±40000ps/nm@100G |
|
OSNR Tolerance |
<11.5dB@100G DP-QPSK:<18.5dB@200G DP-8QAM;<21.5dB@200G DP |
|
16QAM;<14dB@200G DP-QPSK; |
|
Service access type |
100GE、100GE KR4、OTU4和100G FlexE |
|
Board size |
81(W)x39(H)x218(D)(mm) |
|
Environmental requirements |
Operating temperature |
-5℃~45℃ |
|
Storage temperature |
-40℃~85℃ |
|
Relative humidity |
5%~95% non-condensing |
|
Product Size |
101(W)x41(H)x230(D)(mm) |
|
Power consumption |
<80W |
Ordering information
D8000-CH1U-A : DCI 1U Rack, 4 slot for bussines card, and 2 Slot for network Management card,dual fiber AC 100~240V(DC 36~72 Option) 446(W)x46(H)x538(D)
D8N :DCI network Management card, With 2XSFP port, 2XRJ45, 1X Console, And Netview Management Soft V1.0, Supprt SNMP\CLI\WEB\NMS management 77(W)x20(H)x213(D)(mm) Used in D8000 take 1 slot
D841 : 400G DCI Muxponder，4*000G QSFP28 TO 1*400G CFP2 （ 400G OTN Muxponder Card, Used in D8000 take 1 slot）
D822:200G DCI Muxponder, 2channels 2*1000G QSFP28 TO 1*200G CFP2 （ 200G OTN Muxponder Card, Used in D8000 take 1 slot）
Parking List
Certifications
CE/FCC /RoHS
