200 G Trans-Muxponder
D8000-D822
2channels 2×100 G → 1×200 G Trans-Muxponder for D8000-CH1U Managed Chassis
Product Overview
A hot-swappable blade that multiplexes two 100 G QSFP28 client interfaces into a pluggable 200 G CFP2 coherent line optic. Programmable C-band tuning and software-selectable modulation enable seamless integration with DWDM MUX/DEMUX, delivering 200 G wavelengths over fiber-limited or high-loss spans while maintaining carrier-grade performance and reliability.
Specifications
Parameters | Describe |
Maximum capacity of single board | 2*100G dual-directional transmission 2*100G unidirectional transmission |
Wavelength (frequency) range | DWDM:1529.16mm-1567.14nm(191.3THz-196.05THz) |
Adjustment method | DP-QPSK@100G; DP-16QAM@200G; DP-8QAM@200G; DP-QPSK@200G; DP-8QAM@300G: DP-16QAM@400G |
Line side protocol | Open ROADM/Open ZR+/SCFEC |
Dispersion tolerance | ±40000ps/nm@100G |
OSNR Tolerance | <11.5dB@100G DP-QPSK:<18.5dB@200G DP-8QAM;<21.5dB@200G DP 16QAM;<14dB@200G DP-QPSK; |
Service access type | 100GE,100GE KR4,OTU4 and 100G FlexE |
Board size | 86(W)x40(H)x215(D)(mm) |
Environmental requirements | Operating temperature | -5℃~45℃ |
Storage temperature | -40℃~85℃ |
Relative humidity | 5%~95% non-condensing |
Product Size | 100(W)x40(H)x224(D)(mm) |
Power consumption | <86W |
Ordering information
D8000-CH1U-A : DCI 1U Rack, 4 slot for bussines card, and 2 Slot for network Management card,dual fiber AC 100~240V(DC 36~72 Option) 446(W)x46(H)x538(D)
D8N :DCI network Management card, With 2XSFP port, 2XRJ45, 1X Console, And Netview Management Soft V1.0, Supprt SNMP\CLI\WEB\NMS management 77(W)x20(H)x213(D)(mm) Used in D8000 take 1 slot
D841 : 400G DCI Muxponder，4*000G QSFP28 TO 1*400G CFP2 （ 400G OTN Muxponder Card, Used in D8000 take 1 slot）
D822:200G DCI Muxponder, 2channels 2*1000G QSFP28 TO 1*200G CFP2 （ 200G OTN Muxponder Card, Used in D8000 take 1 slot）
Parking List
Certifications
